# Running a race

*For organizers* · https://race-hub.org/en/guide/race

Everything one race needs: creating it, taking entries, the start and the finish on race day, and publishing the results.

## 1. Create the race

Everything starts in the club panel at **race-hub.org/en/organizer**. Click **New race**.

- Enter the name, the start date and time, an optional signup deadline and the description competitors see on the race's public page.
- The race is saved as **Not published**: you see it in the panel straight away. When it is ready, click **Publish** and we will publish it, usually the same day. An e-mail with its links is on its way to you too.
- A saved race opens on its **Courses** tab: if more than one distance is run, add the courses (5 and 10 km, say) and, if they do not leave together, give each its own start — courses with the same start leave on the same gun. Then lay out the categories by course, sex and birth years on the **Categories** tab. A competitor picks a course when signing up, and the public results are read course by course and category by category.
- Pick the **signup fields** — what a competitor fills in besides their name — and, to collect an entry fee, turn on **Scan and pay** and enter the amount: after signing up, the competitor gets a barcode to pay in their banking app.
- On the **Timekeepers** tab, open an account for a volunteer who will time the finish: a name, a username and a password. They sign in at **race-hub.org/timing**, see only this race and never need the club's password. If you time the race yourselves, you can skip this tab.
- For splits, add points on the course on the **Checkpoints** tab: a name is optional, and for each one tick the paths that run through it and the km on each. Then on the **Timekeepers** tab pick where each timekeeper stands in the **Checkpoint** column — or invite one by e-mail straight to their checkpoint.

**Useful tips**

- Before turning on Scan and pay, enter the IBAN, street and city in the **Club profile** — the barcode prints them as the payee.

![New race — name, date, signup fields and scan and pay](https://race-hub.org/assets/img/guide/en/race-new.png)

![The race's courses — distance, climb and a shared or separate start](https://race-hub.org/assets/img/guide/en/race-paths.png)

![The race's categories — by course, sex and birth years](https://race-hub.org/assets/img/guide/en/race-categories.png)

![Timekeepers — volunteer accounts for the finish](https://race-hub.org/assets/img/guide/en/race-timekeepers.png)

![The club panel — the race not yet published](https://race-hub.org/assets/img/guide/en/race-panel.png)

## 2. Entries

Click the race's name to open the **Competitors** tab with everyone entered:

- Anyone who entered through the public form is already on the list — there is no need to enter them again.
- Add a walk-up with **New entry**: the public signup form, plus a **Start number** and a **Paid** box. Save it with a number and Paid ticked and the competitor is started straight away, with no need for the Start button. Without a number, or unpaid, they wait on the list and you start them later like anyone else.
- Every competitor needs a **start number** — it is how the timekeeper recognises them at the finish. A number somebody already has is refused.
- On race day, when a competitor reaches the desk, click **Start** on their row — or type in their start number, which starts them too. That confirms the entry, and the **Started** column shows the time. Without Scan and pay the fee is paid at the desk, so the entry is marked **paid** as well; with Scan and pay the payment mark stays as it was until the money arrives.
- **Signup changes** records every change: who changed what, and when. An empty user means the competitor fixed the entry themselves, through the link in their e-mail.
- What the sign-up asks is set on the **Sign-up** tab of the race settings: the built-in fields (e-mail, phone, address…) and **your own questions**, e.g. a T-shirt size. The answers are columns in the entry list, where you can change them too, and above the list you see how many entries gave each answer.

**Useful tips**

- The filters above the table find a competitor by number, name or club. The **Started** filter shows who has not turned up yet.
- Someone who crosses the finish without being started keeps their time — they are ranked only once you confirm their entry (step 4).
- A question marked **required** cannot stay unanswered: such an entry is red in the entry list, marked **Ask, then click here**, and cannot start until an answer is picked. At the registration desk ask the competitor, click the mark and pick the answer — the row turns back to normal at once. Clicking **No answer** above the list shows only the entries still missing one.

![Competitors — start numbers, the Started column and the Start button](https://race-hub.org/assets/img/guide/en/race-entries.png)

![New entry — the public signup form, plus the start number and payment](https://race-hub.org/assets/img/guide/en/race-entry-new.png)

## 3. The start and the finish

Timing happens in the **Timekeeping** app: the **Timing** button on a race opens it in a new tab, and on a phone it is right at **race-hub.org/timing**. You are signed in as the club, so no separate account is needed.

- If the club has one race today, the app opens straight into it. Otherwise today's races are on top, yesterday's and tomorrow's below, and opening a race nowhere near today asks for confirmation — so times are never recorded against the wrong race.
- When the field sets off, click **Start the race**. If the courses leave at different times (waves), each wave has a button of its own.
- Open **Open timekeeping**, type the start number of the competitor crossing the line and press **Finish**. Before saving, it asks whose number that is ("Confirm #101 Ana Smith at the finish?"), so a wrong number shows before you confirm.
- A volunteer with an account from the **Timekeepers** tab signs in at the same address with their own username and sees only your race. Several phones can record at the same finish at once. Send the volunteer the [timekeeper guide](https://race-hub.org/en/help/timekeepers) too.

**Note**

- Undo a wrong entry with **Undo** in the table below.
- Fix a start given by mistake with **Undo start** on the race screen and start it again when it is time.
- Nothing is lost without signal: entries are kept on the phone and sent as soon as the connection is back — the **Sync** column shows whether an entry has arrived.
- A number nobody holds — handed out on paper, or given after timekeeping was opened — is still recorded, with a warning. Once the desk gives that number to a competitor, **Record finish** appears on their row.

![Starting the race](https://race-hub.org/assets/img/guide/en/race-timing-start.png)

![The finish — start number and the Finish button](https://race-hub.org/assets/img/guide/en/race-scan.png)

## 4. Results and closing the race

The **Results** tab shows everyone who started or crossed the finish, with a status of **Finished**, **In race**, **DNF**, **DNS** or **DSQ**. Click a status to change it.

- A time with ***** means the competitor crossed the finish with no entry recorded: either somebody forgot to start them, or they never came to the desk and did not pay. The time runs from the race start and **is not ranked**. Once the entry is sorted out, click **Confirm entry**.
- Once the last runner is in, click **Close the race**: everyone who started and did not finish becomes **DNF**, so the public results no longer show anybody **In race**.
- The public results fill in from the very first finish, by course and category — share the link with the competitors while the race is still on.
- When the race has checkpoints, the public results refresh themselves while it runs: whoever is still on the course shows their last checkpoint and the time from the start, and **Splits** by each competitor lists every split.

**Note**

- You can correct a time two ways: type the exact clock time of arrival in **Finished at**, or the total race time in **Time**.

![Results — Confirm entry and Close the race](https://race-hub.org/assets/img/guide/en/race-results.png)

![Public results: an unconfirmed start shows – instead of a position and * on the time; whoever did not finish shows DNF](https://race-hub.org/assets/img/guide/en/race-results-public.png)

## 5. Lap-count races

In a standard race the time to the finish counts. In a **lap-count** race the number of laps counts: competitors go round a loop as many times as they can — a walk-a-thon, a charity run or a timed race (one hour, say) — and every pass through the finish is one lap.

- On the race form, set **Race type** to **Lap count**. You can change it later too, even on race day: laps already recorded are counted straight away.
- Timing works as in step 3: start the race, then enter the start number at the finish every time a competitor passes. Their first pass is their finish, every later one adds a lap, and the screen says which lap it was ("lap 4").
- The results are ranked by **Laps**; on equal laps, whoever took less time to their last lap is ahead. The time shown is the time to the **Last lap**. The public results refresh by themselves while the race is on.
- **Undo** removes only that competitor's last lap; undoing their only lap puts them back in the race.
- When the race is over, click **Close the race**. A lap entered after that — from a phone sending its entries late, say — stays in the scan log but is no longer counted in the results; a lap recorded before the close still counts, even if it arrives later. Once you mark a competitor DSQ or DNS in the results, no more laps are recorded for them.

**Useful tips**

- Many people crossing at once? Untick **Confirm every entry at the finish** on the race form: a known number then goes straight in without asking whose it is, so entry is much faster, and a slip is fixed with Undo. An unknown number still asks. The option is on every race, not only lap-count ones.
- Several phones can record at the same finish at once; a pass entered on two of them within 20 seconds counts once.

**Note**

- Laps cannot be typed into the results by hand — they come only from the timing app, and a wrong one is fixed with Undo.
- Two entries of the same competitor less than 20 seconds apart count as one pass, so a lap has to take longer than that.

## Publishing a race

### I created a race but I cannot see it in the race list. Why?

A race created by a club is saved as **not published** and is not shown publicly. When it is ready, click **Publish** next to it in your dashboard: we get the request and publish it, usually the same day. Until then you can see it in your dashboard and keep editing it.

### How long does publishing take?

Usually the same day you click Publish. If you are in a hurry, write to us through the contact form and we will speed it up.

### Can I edit the race before it is published?

Yes, both before and after publishing. Your edits stay; publishing does not undo them. The one exception is the race language: it is set when the race is created and does not change afterwards, because it decides the language of the timing screens, which must not switch under the volunteers mid-event.

## Entries and payment

### Can I change which fields the entry form asks for?

Yes, yourselves: on the race's **Basics** tab pick the **Signup fields** — club, year of birth, gender, e-mail and the rest, with an asterisk marking a required field. If none of the sets on offer fits, write to us and we will add one.

### How do I charge an entry fee?

Enter the club's IBAN, street and city in **Profile** — the barcode prints them as the payee. Then turn on **Scan and pay** on the race and enter the entry fee. The competitor then receives, with the signup confirmation, the exact amount, the payment reference and an HUB3 barcode to scan in their banking app. The amount is the fee plus any paid extras they chose. You mark entries as paid in the competitor list.

### How do I mark who has paid?

Send us the bank statement from your online banking (CSV or XLS) and we will import it: payments are matched to entries by the payment reference and marked paid **only when the amount matches exactly**. A single payment you can mark yourself — the **Paid** box on the competitor's entry (**Edit** on the Competitors tab).

### A competitor made a mistake in their entry. Can they fix it themselves?

Yes. With the entry confirmation they received an edit link, good for one edit; they can request a new one from the entry page, and it is sent to the same address the entry was made from. They cannot change the e-mail address or the race, and cannot change priced items once a payment has been recorded. Every change is listed under **Entry changes**, showing what changed and who changed it.

## Timing

### How do I give a volunteer the finish line without the club's password?

On the race's **Timekeepers** tab, click **+** and enter a name, a username and a password. The volunteer signs in at **race-hub.org/timing** and sees only the races you have added them to. The account stays with the club: at the next race, add it from **An existing club timekeeper**. Removing it from a race does not delete the account. Send the volunteer the [timekeeper guide](https://race-hub.org/en/help/timekeepers) too.

### Timekeeping says nobody holds that number. Is the time lost?

No. Timekeeping asks whether to record it anyway and, once you confirm, keeps the time against the number. When the desk gives that number to a competitor, **Record finish** appears on their row on the Competitors tab: check the time it offers and confirm. If the number was simply mistyped, do nothing — nobody gets that time until somebody is given the number and confirms it.

## Results and ranking

### A competitor has * on their time and no position. What does it mean?

They crossed the finish with no entry recorded: either somebody forgot to start them, or they never came to the desk and did not pay. Their time runs from the race start and is not ranked. Once the entry is sorted out, click **Confirm entry** on the **Results** tab — or start them on the Competitors tab. That puts them in the ranking.

### When do I click Close the race, and can I still change it afterwards?

When the last competitor is in or has certainly dropped out. Closing only sets **DNF** on whoever is still **In race** — it locks nothing. You can still change results and statuses as before.

### A wrong start number was entered at the finish. How do I fix it?

Right at the finish: **Undo** in the Timekeeping table, then enter the right number. A result created only by that wrong entry disappears with it. Later: on the **Results** tab put the wrong competitor's status back and type the right one's time into **Finished at**.
